Mobile Backhaul:  EXK-M2400

Overview

With three option slots, DZS’s EXK-M2400 Mobile Backhaul access/aggregation CSR (Cell Site Router) 1U height chassis provides a variety of solutions to configure the unit according to the network environment. The EXK-M2400 provides four 10-gigabit ethernet ports (SFP+, fixed) and 3 option slots; the option slots support 2x10GBase-R(SFP+), 8×100/1000Base-T (RJ45), 8×100/1000Base-X(SFP) or CWDM Filter(LC) modules, which can be used for uplinks or downlinks.

The option boards are compatible with the EXK-M1200 (except for the CWDM Filter).

The EXK-M2400 service interface connection points are located on the front, while the power connection points are located on the back to ensure equipment-level reliability with a redundant power source, the EXK-M2400 provides two PSU (Power Supply Units) in the back for DC or AC power modules.

View printable version

Specifications

Key Features
  • Small footprint as Cell Site Router product
  • IP/MPLS based network topology supplied
  • Network management via OAM (802.1ag/Y.1731)
  • Ethernet Ring Protection(G.8032)
  • SNMPv1/v2/v3 with RMON, Alarms
  • Improved QoS and differentiated traffic service
  • RADIUS, TACACS+ Authentication
  • Realtime network traffic monitoring and analyzing
  • Modules: 10GE2/GE8/GT8/CWDMFilter
  • IEEE1588v2 TC support
  • Graphic User Interface support
  • Zero Touch Provisioning
  • Power: 2 PSU (-48/24VDC or 110V~220VAC) as redundancy
  • Mac Table 64K, VLAN 4K
  • 200Gbps (Full Duplex) Switching Capacity
  • Flash Memory: 8MB(B/L)+128MB(NOS)
  • SD RAM: 2GB DDR3
Weight & Dimensions
  • 440 x 44 x 350mm
Power
  • AC : 100-240VAC, 50/60Hz
  • DC : -48/24VDC
  • Consumption: 60[W]
Interfaces
  • Main Chassis: 4 port 10GE(SFP+)

Option Board (3 Option Slot for Interface Unit)

  • IU_10GE2 : 2 port 10GBase-R (SFP+)
  • IU_GE8: 8 port 100/1000Base-X (SFP)
  • IU_GT8: 8 port 100/1000Base-T (RJ45)
  • IU_CWDM: 2 x 8 channel CWDM Filter

Power and Fan

  • PSU : 2 Power module( AC or DC)
  • FAN : 2 Slot FAN

Management (Total 3 Ports)

  • 1 port RS232 for console (RJ45)
  • 1 port GTX for MGMT (RJ45)
  • 1 port Alarm in/out (RJ45)

Clock Function:  Total 5 Ports (2 SMA, 3 RJ45)

Standards Support

Layer 2

  • Standard Ethernet Bridging
  • Port/Subnet/Protocol-based VLAN
  • 64K MAC Address Entries
  • Spanning Tree: STP, RSTP, MSTP
  • 3ad Link Aggregation

Layer 3

  • IPv4 Routing
  • IPv6 Routing
  • RIPv1/v2, OSPFv2, BGPv4
  • VRRP Support

Multicast

  • IGMP v1/v2/v3
  • L2(4K)/L3(4K) muticast Entries
  • IGMP Snooping
  • PIM-SM/SSM
Protocol Support

QOS

  • 8 Queue Management
  • Ethernet type / L4-based ACL
  • QoS and Marking : SP, WRR, DWRR
  • Port rate limit with the ingress/egress shaping

MPLS

  • Fully compliant IP/MPLS Function
  • Fully compliant with MPLS OAM (BHH, BFD)
  • RSVP-TE, BFD Support

OAM

  • Fully compliant with IEEE 802.1ag(CFM)
  • Fully compliant with ITU-T Y.1731
  • Ethernet Ring Protection(G.8032)

Clock Function

IEEE 1588v2 TC

Operating Requirements
  • Temperature: -40~65°C
  • Humidity: 5 to 90% (non-condensing)
Management
  • Serial / Telnet (CLI)
  • RMON
  • SNMPv1/v2/v3
  • Zero Touch Provisioning

Ordering Information

EXK-M2400 Packages
Model
Description
EXK-M2400-DC
MPLS L2/L3 SWITCH, 4X10GE (SFP+), 3-IUMOD 1-PSUMOD BLNKS, FANS, -45-65C, 1-24V/48V DC PSU(REQ XCVRS)
EXK-M2400-AC-NA
MPLS L2/L3 SWITCH, 4X10GE (SFP+), 3-IUMOD 1-PSUMOD BLNKS, FANS, -45-65C, 1-PSU NA PLG (REQ XCVRS)
EXK-M2400-AC-EU
MPLS L2/L3 SWITCH, 4X10GE (SFP+), 3-IUMOD 1-PSUMOD BLNKS, FANS, -45-65C, 1-PSU EU PLG (REQ XCVRS)
EXK-M2400-AC-UK
MPLS L2/L3 SWITCH, 4X10GE (SFP+), 3-IUMOD 1-PSUMOD BLNKS, FANS, -45-65C, 1-PSU UK PLG (REQ XCVRS)
Redundant PSU Options/Spares
Model
Description
EXK-M2400-PSUMOD-DC
M2400 PSU MODULE, 48VDC
EXK-M2400-PSUMOD-AC-EU
M2400 PSU MODULE, 100-240VAC W/EU PLUG
EXK-M2400-PSUMOD-AC-NA
M2400 PSU MODULE, 100-240VAC W/NA PLUG
EXK-M2400-PSUMOD-AC-UK
M2400 PSU MODULE, 100-240VAC W/UK PLUG
IUMOD Options/Spares
Model
Description
EXK-M2400-IUMOD-2X10G
M2400 2X10G (SFP+) IU MODULE (REQ XCVRS)
EXK-M2400-IUMOD-8XFEGE
M2400 8X FE/GE (SFP) IU MODULE (REQ XCVRS)
EXK-M2400-IUMOD-8XFEGE-CU
M2400 8X FE/GE (RJ45) IU MODULE
Miscellaneous/ Spares
Model
Description
EXK-M2400
MPLS L2/L3 SWITCH, 4X10GE (SFP+), NO PSUS, NO FANS, -45 TO 65C (REQ XCVRS)
EXK-M2400-FAN-ASSEMBLY
M2400 FAN TRAY ASSEMBLY W/(4) FANS
EXK-M2400-SW-IPMPLS
M2400 SOFTWARE PACKAGE FOR IP-MPLS