C1216RO

Overview

C1216RO is an outdoor type TSN (Time-Sensitive Networking) switch which capable of accommodating 4G, 5G and Wi-Fi services simultaneously on a single platform. With the various types of service interfaces such as CPRI, eCPRI and 25Gbps Ethernet, the C1216RO can aggregate traffics like 5G RU (Radio Unit), 5G mmWave (millimeter Wave), 4G RU, Small Cell and Wi-Fi AP (Access Point). Then C1216RO transmits traffics to 5G DU (Distribution Unit), 5G CU (Central Unit), 4G DU via 25/50/100Gbps Ethernet uplink interface. With high-precision timing, TSN offers synchronization to the cell site remote radio, while maintaining low latency variation for aggregated 4G and 5G traffic by preempting other packets.

View printable version

Specifications

Key Feature

• Flash 8MB NOR (Boot) & 512MB NAND (NOS) • SDRAM 4GB DDR4 with ECC • Support 10/25/50/100G Ethernet interfaces • Support CPRI interfaces

• One console interface for management access • 1 GE interface for out-of-band management

Dimensions

300(W) x 148(H) x 400[448*](D) mm * with handle

POWER

Power Voltage

-37 to -57 VDC, Nominal -48VDC

Power Consumption

130W

Interface

25/50GBase-R

– 2 x 25/50GBase-R (port 1,3 with SFP28)

– 4 x 25/50GBase-R (port 1,2,3,4 with DSFP)

9 x 25GBase-R (SFP28)

2 x 50/100GBase-R (QSFP28) cable pass through

3 x CPRI (SFP+)

1 x Console port (RJ45-to-DB9)

1 x MGMT port (RJ45)

1 x Alarm port, support up to 4 alarms

Protocol Support

Layer 2

• Switching and Ethernet bridging

• IPv6

• A-A load sharing (LACP)

• VLAN stacking/translation

• VLAN (802.1q, QinQ, 802.1p)

• TSN (802.1AS, 802.1Q, 802.1Qbv and Other related)

TWAMP

• TWAMP Reflector

QoS

• Scheduling

• Classification and queuing

Security

• MACSec, Authentication, Port Based Authentication

Clock

• GPS receiver

• 1588v2 GM

• 1588v2 BC/TC

• SynE

System

• ISSP (In Service Software Patch)

• Hardware based watchdog

• Syslog, Port Mirroring

Management

• SNMP v2/v3 • Netconf/YANG

• Y.1731

• Y.1564

• SSH

• ZTP

• DHCP IPv6

• Plug n Play

Operating Requirements

Operating Temperature

-40 to 50°C

Operating Humidity

10 to 80% (non-condensing)