A1100(10GE Switch)

Overview

A1100 is a single slot Advanced Telecom Computing Architecture (ATCA) packet processing module/blade compliant with PICMG 3.0/ 3.1 (Option 1 & 9) interface specification. It is ideal for dual-star and full-mesh configurations in 14 slot (EIA cabinet) and 16 slot (ETSI cabinet) systems,it also provides Rear Transition Module (RTM) for fabric and base interface extension.

The base interface switch provides Gigabit Ethernet services on 15 base channels via ZONE 2 and 2 Fast Ethernet to the shelf managers. The fabric interface switch provides 10GbE (10GBase-KX4, XAUI) service on max 14 (min. 12) channels via ZONE 2 connectors. The A1100 provides in-band and out-ofband access to RS232 console port and 10/100/1000Base-T Ethernet management port. The main advantages of AdvancedTCA are high throughput, multi-protocol support, and high-power capability, hot swap ability, high scalability and integrated system management.

View printable version

Specifications

Features
  • PICMG 3.0 compliant base interface switch
  • PICMG 3.1, Option 1,9 fabric interface switch (1G/10G)
  • Front Interface
    – 4 x 1G/10G SFP+ (Base Interface)
    – 4 x 1G/10G SFP+ (Fabric Interface)
  • Rear Transition Module (RTM) Interface
    – 4 x 1G/10G SFP+ (Fabric Interface)
    – 2 x 1G SFP (Base Interface)
    – 4 x SSU/BITS, RJ45
  • Network timing for synchronization and clocking
  • Full non-blocking multi-shelf system solution
  • Removes issues of latency and delay in the time-sensitive voice applications
  • Common & familiar CLI via console/telnet
  • SNMPv2/v3, Alarms
  • L2/L3/L4 classification / priority management
Power
  • Maximum Power Consumption (with RTM): 107W
Interfaces
  • 320Gbps Switch (BroadCom BCM56842)
  • Fourteen ATCA Fabric ports for 1G/10G (PICMG 3.1 option1 & 9) payload nodes, individually selectable
  • 1 x 10GbE Inter-Switch link (ISL) with redundant switch
  • 24port 1GbE switch & 4 x 10GbE port(BroadCom BCM56334)
  • 10/100/1000Base-T/TX/T for all node slot in 14 or 16 slot chassis
  • 1 x 1GbE Inter Switch Link (ISL)
  • 2 x 10/100Base-T/TX to two Shelf Manager
Protocol Support
  • IEEE 802.1Q Virtual VLAN
  • Port Mirroring
  • VLAN Mirroring (Ingress)
  • GVRP (GARP VLAN registration Protocol)
  • IEEE 802.1 standard group addressing includes GMRP protocol
  • Support Jumbo frames
  • LAG (Link Aggregation) based on MAC or IP
  • LACP (Link Aggregation Control Protocol)
  • xSTP (STP compatible, PVRSTP, MSTP)
  • Support Flow Control
  • LLDP (Link Layer Discovery Protocol)
  • FI switch L3 Routing LPM entries: IPv4 16K, IPv6 8K
  • IGMPv3 snooping
  • ARP, proxy ARP, RARP
  • ICMP (Internet Control Message Protocol)
  • Standard and extended Layer 2 and Layer 3 ACL
  • VRF with static and dynamic routing (OSPF v2/3 for IPv4 and IPv6)
  • Static, Uni-cast and Policy Based Routing
  • OSPFv2/3 (Open Shortest Path First)
  • BGP (Border Gateway Protocol) v4 for IPv4
  • ECMP (Equal-cost multi-path)
  • VRRPv2 for IPv4 and VRRPv3 for IPv6
  • BFD (Bidirectional Forwarding Detection) on IPv4 and IPv6
  • IEEE 802.1p frame priority
  • IEEE 802.1SP Strict Priority Queuing
  • WRR, WERR
  • Diffserv
  • srTCM/trTCM color marking and metering
  • PFC, QCN, ETS
Management
  • SNMP v1,v2,v3
  • MIBs
  • Serial and Telnet (CLI)
  • TFTP client for remote SW upgrade
  • SSH v2 Secure Shell Daemon
  • NTP, NTPv2, v3 (Network Time Protocol)
Operating Requirements
  • Operating temperature: 23~131°F (-5~55°C)
  • Operating voltage: -39/72VDC
  • Ambient Humidit: 5~90%