M3200

Overview

The M3200 is based on Carrier Ethernet functionality. It is a 2RU size carrier Ethernet switch for mobile beckhole that can be mounted on a 19-inch rack.

Today’s mobile networks must accommodate subscribers’ bandwidth needs, complexity and demanding quality-of-service (QoS).

M3200 is incredibly powerful and flexible for optimized mobile backhaul access CSR (Cell Site Router) aggregation to efficiently address the security requirements of backhaul networks.

M3200 for mobile backhaul offers a variety of solutions for 2U height chassis:

Flexible configuration depending on network environment. The M3200 has 24 10 Gigabit Ethernet ports (SFP +, fixed) and two optional slots, 2x40GBase-R (QSFP +), 8x10GBase-R (SFP +), 2×100 / 1000Base-T CWDM Provides a filter (LC) module that can be used for uplink or downlink. The M3200 power connection point is located at the rear and can accommodate two DC or AC power modules.

Provides PSU slots. The M3200 provides redundant power to ensure equipment reliability and survival.

The M3200 offers high performance, high reliability aggregation and routing services, as well as other mobile backhaul equipment from Verifiable Network Solutions.

M3200 acts as an advanced carrier Ethernet switch. Supports backhaul requirements such as routing, GRE tunneling, standard Ethernet bridging, G.8032 Ethernet ring protection, Q-in-Q providing service guarantees for EFM Y.1731 OAM and MEF wireless operators. As such, the M3200 provides a flexible interface to provide the benefits of a diversified network service and network extension.

View printable version

Specifications

Key Features
  • High density 10-giga ethernet Aggregation product
  • IP/MPLS based network topology supplied
  • Network management via OAM (802.1ag/Y.1731/)
  • Ethernet Ring Protection(G.8032)
  • SNMPv1/v2/v3 with RMON, Alarms
  • Improved QoS and differentiated traffic service
  • RADIUS, TACACS+ Authentication
  • Realtime network traffic monitoring and analyzing
  • Modules: 10GE8/GT12/CWDMFilter/40GE2*
  • IEEE1588v2 TC/BC,Synchronous Ethernet
  • End to End configuration through INAS(EMS)
  • Zero Touch Provisioning
  • Power: 2 PSU(-48/24VDC or 110V~220VAC) as   redundancy
Dimensions

Size (W x H x D)

  • 440 x 88 x 390 mm
POWER

Input

  • AC : 100-240VAC, 50/60Hz
  • DC : -48/24VDC

Power Consumption

  • Max. 220W
Interfaces

Service Port

  • Main Chassis : 24 port 10GE(SFP+)
  • Option Board (2 Option Slot for Interface Unit)
  • IU_40GE2* : 2 port 40GBase-R(QSFP+)
  • IU_10GE8 : 8 port 10GBase-R(SFP+)
  • IU_GT12: 12 port 100/1000Base-T(RJ45)
  • IU_CWDM: 2 x 8 channel CWDM Filter

Console Port

  • 1 Port  (RJ45)

MGMT Port

  • 1 Port  (RJ45)

 

‘*’ : Roadmap

Protocol Support

Layer 2

  • Standard Ethernet Bridging
  • Port/Subnet/Protocol-based VLAN
  • 288K(UFT) MAC Address Entries
  • Spanning Tree: STP, RSTP, MSTP
  • 802.3ad Link Aggregation

Layer 3

  • IPv4 Routing
  • IPv6 Routing
  • RIPv1/v2, OSPFv2, BGPv4
  • VRRP Support

Multicast

  • IGMP v1/v2/v3
  • L2(16K)/L3(8K) muticast Entries
  • IGMP Snooping
  • PIM-SM/SSM

QoS

  • 8 Queue Management
  • Ethernet type / L4-based ACL
  • QoS and Marking : SP, WRR, DWRR
  • Port rate limit with the ingress/egress  shaping

MPLS

  • Fully compliant IP/MPLS Function
  • Fully compliant with MPLS OAM (BHH, BFD)
  • RSVP-TE, BFD Support

OAM

  • Fully compliant with IEEE 802.1ag(CFM)
  • Fully compliant with ITU-T Y.1731
  • Ethernet Ring Protection(G.8032)

Clock Function

  • IEEE 1588v2 TC/BC
  • Synchronous Ethernet(SyncE)
  • 1PPS, 10MHz, TOD, BITS
Management

Interface

  • Serial / Telnet (CLI)
  • RMON
  • SNMPv1/v2/v3
  • Zero Touch Provisioning
Operating Requirements

Operating temperature

  • -40~149°F (-40~65°C)

Storage temperature

  • -40~176°F (-40~80°C)

Humidity

  • 5 to 90 % (non-condensing)

Heat transfer

  • Air inlet   − on the front side of the switch
  • Air outlet − on the rear side of the switch